2014 Aluminum Alloy Wire
Product Detail:
|
Place of Origin: Shanghai, China (Mainland) |
Brand Name: YIKAI |
Model Number: 2014 |
|
Application: extensive |
Al (Min): 99.8% |
Alloy Or Not: Is Alloy |
|
Diameter: 0.3mm-10mm |
Temper: O-H112 |
advantage: quality assured |
|
after service: provide full technical support |
The company type: factory |
Surface: Mill finish,Brushed,Powder Coated, Wooden Finish,etc |
|
|
|
|
Product Specification:
Our company produces various types of aluminum wire, this product is acid and alkali resistant,
corrosion resistance, high strength, good toughness, and it does not fade at high temperatures (120 ℃).
So products with aluminum-magnesium alloy micro wire would not deform easily, and there is a good shielding effect.
Featured by small density and high strength, the aluminum magnesium alloy tool is the lightest
metal component material at present. Aluminum magnesium alloy wire can be used for core wire
(as a substitution of copper wire) and shielding weaving wire which are widely applied to all kinds
of communication cables, coaxial cables, being the supporting products of broad band
transmission network and communication network.
Properties of Aluminum wire and alloy wire:
|
Alloy |
Uyimate Tensile Strength (PSI) |
Electrical Resistance |
Density (g/cc) |
Melting Point |
|
1100 |
13000 |
18 |
2.71 |
645° |
|
1350 |
13000 |
17 |
2.70 |
648° |
|
1199 |
6800 |
15 |
2.70 |
660° |
|
2024 |
27000 |
20.25 |
2.78 |
638° |
|
3003 |
16000 |
20.25 |
2.73 |
654° |
|
4043 |
21000 |
25 |
2.69 |
632° |
|
5005 |
18000 |
19.95 |
2.70 |
654° |
|
5052 |
28000 |
10.2 |
2.68 |
649° |
|
5056 |
42000 |
36 |
2.64 |
605° |
|
6061 |
17000 |
22 |
2.70 |
617° |
Aluminum alloy 5056
Commonly referred to as Alclad 5056, this alloy possesses moderate to high strength, is non-heat treatable by cold working and has good welding characteristics. Care must be taken when cold working
above 66℃ to avoid stress corrosion. 5056 aluminum is our highest strength alloy and has good corrosion
resistance in marine atmospheres largely due to its high purity aluminum outer cladding which usually
measures 20% total thickness per side. Magnesium is the major alloying element. Applications include cable
sheathing, rivets, mandrels, nails and wire screens. Common cold heating temperatures are 0 and H32.
Aluminum alloy 1350
This is a non-treated heatable alloy that is hardened by cold working. It has 99.5% aluminum. It is categorized as Wrought Aluminum
Alloy. The most common application for this alloy is as an electrical conductor.
Aluminum alloy 1100
This alloy cannot be treated by heat and has at least 99% aluminum and is strain hardenable. It is highly
resistant to chemical attack and weathering, but would not be used where strength is a prime
consideration. Rather the emphasis high corrosion resistance, formability and electrical
conductivity are required. This alloy is particular for applications that require a lot of work being repeated.
Advantages:
1. There is no oil stain on the wire surface, it is very clean and would not stain your hands.
2. The wire surface is very smooth, and there is no burrs, our wire is very beautiful.
3. The wire surface is bright.
4. Our wire adopts unique technique, which makes our wire would NOT break, customers would save many human,
financial, physical power, so as to save your cost.
5. Our wire is very clean and smooth, so there is no need for you to rehandle the wire, and then you save your cost.
6. The wire color is very steady.
Contact Us:
Shanghai Yikai Metal Products Co., Ltd
No.3128 Husong Road, Songjiang district.
Shanghai city, China
Tel:0086-021 61849969
Fax: 0086-021 67722898
Skype id:Kandee Huang
Email:chinasteel@yikaisteel.com
Yikai Aluminum